Home / Products / Band Heater
The Ceramic heater is made of ceramic strip instead of ordinary convoluted mica wire. So its the power is 0.5~1.5 times higher than normal product. The heating body is imported round wire， which is rolled as spring shape and then penetrate into the ceramic strip. The outer cover is stainless steel. And the high-temperature heat insulated cotton (aluminum silicate fiberboard) is placed in the center to prevent the temperature leakage. Ceramic strip is high frequency ceramics. Fast heat transfer, hard and breakage-proof, high temperature but no deformation and hard to aging are all its advantages.
Performance of our ceramic heater
It is mainly suitable for extrusion, casting and downward machines. Its temperature can reach 450 degrees, the surface load of 6.5 W/cm. It has long life, high temperature resistant, 30% lower energy consumption, high insulation, which is the most appropriate electric heating products for extrusion machines, injection molding machine, film blowing machine currently.
It is mainly suitable for extrusion, casting and downward machines. Its temperature can reach 450 degrees, the surface load of 6.5 W/cm. It has long life, high temperature resistant, 30% lower energy consumption, high insulation, which is the most appropriate electric heating products for extrusion machines, injection molding machine, film blowing machine currently.
1. Quick Heat transfer, even heating and stable work.
2. no leakage of temperature, SAVE ALMOST 30% ENERGY . outer cover can be touched by hand , and safe work .
3. high power , 0.5~1.5 times higher than normal product.
4, high temperature resistant heat wire, fast heat dissipation ,even temperature, stable high temperature , can be used for a long time in the 600-800 ℃.
5. Long life because its slow aging of the raw materials under high temperature
6.Power deviation± 5% .
7. Electrical strength: after 1500v/50Hz Sinusoidal alternating voltage test, and no breakdown after 1MIN.
8. High mechanical strength, good thermal insulation performance, large contact surface for heated objects, long service life.
9. Convenient installation and maintenance, low cost. The external ceramic parts can be reused even if the internal heating materials are damaged.
1.Plastic injection moulding machine
2.plastic extrusion machines
3.plastic hollow and blowing machines
4.chemical fibre moulding machines
5.Hollow shaping machine/Blow-molding machine
6.Extrusion machine/Co-extrusion line
7.Plastic Raw material processing equipment
8.Plastic Granular machine
9.All types of plastics processing machines
|
Product Name |
Ceramic Heater |
|
Leakage current |
<0.5mA |
|
Insulation resistance |
≥ 500 MΩ; |
|
Wattage Tolerance |
±5% |
|
Voltage resistance |
no electric breakdown for 1 minute under 1500v |
|
Temperature endurance |
500-800 degree C |
|
Resistance Tolerance |
±5% |
|
Usage |
Normal temperature 250 degree,max 600 degree |
|
Heating wire |
Ni-Cr or Fe-Cr |
|
Use condition |
environment temperature -20~+60 degree C,relative temperature<80% |
|
It’s Better to Provide Us With The Drawings/Pictures |
|
Note:other models are available according to your specifications.
For order ceramic band heater, Size, Wattage & Voltage are available on request.
Please contact us with your special requirements. We are pleased to contact you if you would like more information or want to discuss custom product availability and pricing.
Welcome to order sample ceramic band heaters for initial evaluation.
Lead Working Condition
It’s Better to Provide Us With The Drawings/Pictures
After-sale Service Is Available Within One Year Warranty Period for Mica Plastic Extrude Heater band heater.
That means if any quality problems occur within one year , we provide technical guidance through internet
Q:Are you a trade company or a manufacturer?
A: We are manufacturer.
Q:What is your payment terms?
A: 30% TT deposit in advance and 70% balance before shipment.
Q:Sample time and delivery time ?
A:Normally it will take u about 7 days to finish the sample,and for mass production is based on quantity.
Q: What is your working time?
A:Our working time is from Monday to Saturday, 8:30 AM -17:00 PM (Beijing time, GMT+08.00).
Q: Do you provide free samples?
A:Yes, we do. but we do not bear the shipping costs.
Q: How about the lead time and payment terms?
A:The lead time usually takes 1 to 3 weeks if we have materials in stock, otherwise, it will take another 1-2 weeks. the delivery time also can be decided by the quantities
Concerning the payment terms, T/T,L/C, D/P,D/A,Western Union
More inquiry,please feel free to contact with me anytime!
Our friendly team would love to hear from you!
EN
